Triton T80si Electric Shower – 9.5kW (T70SI, Aquatronic, Perluso, Riba)

Product Information

If you have a tank-fed cold water system (rare) then thispumped electric shower is the one for you. Connecting to your cold water tank supply, this shower will give you a revitalising boost even at the lowest of pressures thanks to its in-built pump. This shower must not be connected to the mains cold water supply.

Triton Showers Installation and operating instructions - Triton Showers

Basins By Style Traditional Basins Modern Basins Small Cloakroom Basins Corner Basins Copper Basins Perhaps the spare part I require isn't part of the Triton T80si electric shower as such. It is the plastic cover plate at the bottom of the bar on which the shower is mounted - concealing the screws fixing it to the wall. (A twin of the one at the top of the bar). Is that bar a common item for all Triton showers? Installation was simple although the 90degree fitting was tight and leaked until I realised you had to push very hard to get it on fully.This shower was a replacement for the original shower witch was also a Triton pumped shower what l fitted fifteen year’s ago. The normal problem with the shower when no water flowing is the soleniod has failed in the shut position. If you were to carry out a continuity test over the spades on the coil this will confirm the problem

Triton T80i shower spares and parts | Triton T80i | National Triton T80i shower spares and parts | Triton T80i | National

Underfloor Heating Electric Underfloor Heating Underfloor Heating Thermostats Underfloor Heating Insulation Boards Underfloor Heating Accessories

The shower handset features 5 spray patterns, giving you the choice of how you’d like your shower experience to be. You can choose whether you'd like your shower to be soft and luxurious to relax and wind down, or a powerful downfall to revitalize you in those tired mornings, allowing you to truly personalise your shower depending on your mood. If it all measures OK dont rule out the possibility that a chalked up hose or inlet filter flow rate, and gives a low flow/low pressure problems. Hello, it is probably the PRD, you need to have the cover off the see where the leak is coming from. Consult a plumber, if you are unsure about attempting a DIY repair.